1. Product model: 805#
2. Product Features:
This product is a single-component room temperature curing elastic silicone coating. It has good transparency, strong adhesion, good elasticity, good high and low temperature resistance (-60℃～200℃), fast curing speed, excellent weather resistance and excellent electrical properties.
This product is used in the plant growth lamp industry as moisture-proof, insulation, anti-sticking, isolation, flame retardant and other purposes.
3. Typical technical indicators:
Serial number | project | Index value |
1 | Appearance | Transparent liquid |
2 | Viscosity (CPS) | 150~200 |
3 | Dry time | 10-30 minutes |
4 | Completely cured at room temperature | 8-12 hours/thickness 2mm |
5 | Hardness (Shore A) | 25 |
6 | Elongation % | 200 |
7 | Breakdown voltage MV/mm | 16 |
8 | Volume resistivity Ω.cm | 1×1013 |
9 | Dielectric constant (1MHZ) | 3.2 |
Does not contain any harmful substances specified by Weee | ||
4. Usage:
a) This product is a single component that cures at room temperature. After curing, it reacts with moisture in the air. Therefore, the higher the humidity in the air, the faster the curing speed, and the higher the ambient temperature, the faster the curing speed.
b) This product contains volatile solvents. During construction, ventilation should be enhanced to ensure safe construction and all open flames are prohibited.
c) When using, you can dip, brush or spray. Cover the lid as soon as possible after pouring it out to prevent the paint from curing in contact with air. You can also use petroleum ether to dilute it. (The ratio can be based on the actual concentration used by the customer)
V. Packaging and storage:
d) This product is packaged in 1kg/bottle, 3.5kg iron drum, or can be packaged as agreed with the user.
e) This product is valid for six months from the date of production. It can still be used if it passes the re-inspection after the expiration date.
f) This product should be stored away from light, sunlight and rain.
