Product name: Epoxy resin dissolving agent
Since epoxy resins contain active epoxy groups in their molecular structure, they can react with various types of curing agents to form infusible polymers with a three-dimensional network structure. Therefore, epoxy resin adhesives or epoxy resin coatings are difficult to remove after curing. For products processed with epoxy, when they need to be reprocessed or recycled, the epoxy resin adhesive layer or coating must be removed without damage. In order to meet the market demand for such products, Rongbang has launched a highly efficient and environmentally friendly epoxy resin curing agent remover product.
Product Usage
Used to remove epoxy resin, phenolic resin, acrylic resin, 502 instant glue, polybutadiene, melamine and other polymer-based coatings and epoxy resin glue, bonding, potting and curing parts. And defective products in high-voltage electrostatic epoxy powder spraying. Such as refrigerators, washing machines, electric fans, various household appliances hanging parts, hangers, racks, various sizes of product parts repair. This product only reacts chemically with glue, but special components and equipment are excluded. Please use it with caution. After removal, it will not deform various metals and can maintain the original finish. It is the most ideal product for removing high-voltage electrostatic powder coatings.
Instructions
1. Immersion type: Simple and convenient operation: Pour the agent into a sealed container to prevent volatilization. Immerse the parts that need to remove the adhesive potting and coating completely in the remover and seal with the cover. Due to the different thickness of the coating and adhesive potting, the time depends on the thickness and quality of the glue. Observe regularly and shake frequently to speed up the dissolution rate. The coating and adhesive potting glue will be automatically removed. Rinse with water after removal.
2. Covering method: Use cotton to absorb the degumming agent and place it on the surface of the glue to be degummed, then cover it with a layer of plastic cloth, and then cover the surface with a wet towel to prevent evaporation. Repeat the operation.
3. After using this agent, you can use a filter to filter out the removed resin and it can be used repeatedly.
Precautions
1. This agent is solvent-based, volatile and irritating to the skin. To avoid inhalation and contact with the skin, ventilation should be performed and protective gloves and masks should be worn during operation. An exhaust fan should be used indoors, and outdoor operation should be selected.
2. This agent will dissolve most plastics, please use it selectively.
3. If it accidentally comes into contact with your skin, wash it immediately with plenty of water and soap. See a doctor if you feel any discomfort.
4. Because this agent is volatile, the shaking and collision during transportation will cause a large amount of gas to accumulate in the can. Therefore, please unscrew the bottle cap slowly when opening it to allow the gas to overflow slowly to avoid splashing on your body and causing unnecessary damage.
5. Observe the dissolution process in time to prevent damage to other components. Note: Be careful when dissolving important components. If any adverse consequences are caused, you will be responsible for them.
Packaging and storage
1kg 5kg 10kg 25kg. Store in a cool place, shelf life 2 years.
Application Areas
